How To Install A Spa On Your Backyard

A spa is one of the recreational facilities you can enjoy from the comfort of your home. It’s a bath filled with hot aerated water. People mainly use it for relaxation. With this, you no longer need to visit a hotel or pay for this amenity.

Suppose you want to install a spa in your background. How will you do it? Here’s a guide to the process:

Purchase A Spa

Purchasing is the ideal first step to take for your project. Doing so guides you on the next steps to take. It also kickstarts the project as there’s now no second-guessing your decision to install a spa in your background. Lastly, it ensures fast project execution.

Researching the available spas is an important step to take. Spas differ in terms of design and features. You’ll find energy-efficient inground spas, large and small spas, and spas that sit on the ground. Your needs should guide your choice. Opt for a large-sized spa if you have a large family.

Ensure you buy a high-quality spa. It’ll serve you for a long time, if not a lifetime.

Scout For A Location

Where do you want your spa to be? It’s a question you must ask. Your needs will best guide your choice. The first need surrounds privacy. Do you have neighbors around your backyard, or does it border the road? In this case, find a location next to the wall with the former and center the spa for the latter situation.

Are there other amenities in your backyard? It could be a fireplace, patio, or playground. Do you want the spa near or far away from them? Overall, your ideal location shouldn’t hinder your enjoyment of the other amenities.

As previously stated, spas come in various sizes. Your chosen location should fully accommodate it.

Excavate The Area

Excavating your chosen location is the first step in preparing where your spa will sit. It entails digging the area. You can opt to excavate by hand or use a small-sized excavator. The choice depends on the time on your hands and the labor you have.

Ensure the hole is wider than your spa by 8 to 12 inches. It also shouldn’t be less than 41 inches from the top of your spa. This allowance will accommodate any finishes of your spa.

Work On The Drainage

Once you install the spa, you want to ensure proper drainage. Underground water should drain effectively without interfering with your spa.

It’s best to install weeping tiles along the perimeter of your hole. It’ll keep water away from your spa. Be sure to place a filter cloth against the weeping tiles. The cloth will prevent soil from entering the tiles and hindering drainage.

Prepare The Base

The base is where your spa will sit directly. Start by levelling the ground. You want your inground spa to be flat and not bend on one side. Proceed to lay ¾ inch of gravel in the hole. It’d help that it’s crushed, or the top layer is well distributed. As stated, you want the surface to be flat. You also want to prevent the gravel from digging into the spa and causing a hole over time. 

Besides holding the spa, the gravel allows for adequate drainage. There’ll be no sogging that might affect your spa’s settlement.

Place Your Inground Spa

With the base ready, place your spa. It’s the stage where you ensure the level is right. If it isn’t right, rectify the base. After placing it, it’s time to connect any pipes and electrical wiring needed. The location of your connections should allow for easy accessibility to the water pump.

It’s important to have a qualified plumber and electrician to do the connections for you. Errors won’t make your spa function as it should. You’ll require repairs that cost you money and time.

Secure The Spa In Place

After appropriately adding all the connections, it’s time to secure the inground spa. For this step, it’d help to fill the spa with water for stability during the process. Proceed to backfill the hole with ¾ inch gravel. It’d help to compact the gravel for the utmost stability. You don’t want the gravel to settle with time; your inground spa will stick in place.

After fully securing the spa, fill it with water, leaving around three inches from the top. Your inground spa is ready for your enjoyment; it’s formed part of your other background amenities.

Points To Note

  • In the place where you aren’t installing an inground spa, adopt a concrete base after laying the gravel. Also, you don’t have to dig too deep.
  • Most states have regulations regarding spa installations. For example, you can’t install a spa within three meters of overhead power lines. It’s best to learn these regulations beforehand. Your local council can assist you with this information.


Installing a spa in your background is easily achievable. You only require the right insight, which this article gives. Consider the ideas mentioned here as you plan and prepare.

Khuwalid Khalid
Contact at

Dallas-Fort Worth, Texas Real Estate Market Update

According to Redfin, in May 2022, homes in the Dallas housing market were up 21% from last year. The market is competitive, even though...

Things Needed When Planning a Wedding in 2021

To be honest, a wedding is one of the most overwhelming experiences. Especially after having hosted a fancy engagement party with a...

Checklist: Working With a Moving Company

If you decide to move with a moving company, you have to work through a checklist just as you would if you...

5 Common Signs You Need Drain Cleaning

Drains require proper maintenance to function efficiently. Several elements can cause drain clogging, especially after being flushed down the system. There is...

Magnetic or Electronic Door Locks | What to Choose

Did you know that over a third of burglars enter a property through the front door? Getting the right lock for the front door...

Simplify your life and relax, professional house cleaning

Everyone desires a spotless home since it will improve life. Professional cleaning services carry out their due diligence and confirm that their personnel can...