5 Pool Care Tips to Keep Your Pool Clean All Year

If you own a pool, you know how important it is to keep it clean. A dirty pool can be an eyesore, and it’s also a breeding ground for bacteria and algae. If left untreated, these can lead to illness and even death. Fortunately, there are plenty of things you can do to keep your pool clean all year.

  • Put In an Intex Pool Cover

Intex pool covers are a great way to keep your swimming pool clean and protected. The cover itself is made from durable vinyl that won’t rip or tear, and it comes in a variety of sizes to fit any standard-sized above-ground pool. These covers are easy to install, so you don’t need any special tools or skills; all you have to do is lay the cover on top of your pool and secure it with the included straps.

The main benefit of using an Intex pool cover is that it keeps leaves out of the water when they blow into your yard, this helps keep debris from building up at the bottom of your pool, which can lead to algae growth that’s hard to remove. A covered swimming space also retains more heat than an open one because less sunlight hits its surface area (which means less evaporation).

  • Test the Water

Test the water every week. It’s important to keep an eye on the pH levels and chlorine levels in your pool, and these can be tested with a test strip that you can find at any local hardware store. This should be done at least once a week, but you may also want to test it more frequently if there is rain or excess humidity in the air.

Test the water in the morning. For best results when testing your swimming pool’s chlorine levels, always do so first thing in the morning before anyone has been swimming, this will give you an accurate reading of how much chlorine is needed for cleaning purposes. If possible, choose a day when no one has used it so far that day (or make sure everyone gets out of their bathing suits).

  • Check the Chemicals

To keep your pool clean, you should check that the following chemicals have been added:

  • Chlorine and pH are at the recommended levels. Your chlorine level should be between 1 and 3 parts per million (ppm), and your pH should be between 7.2 and 7.6.
  • Alkalinity is at the recommended level. Alkalinity measures how well your water can resist changes in pH levels; it should be between 80 and 120 parts per million (ppm). If alkalinity is too low or too high, it can cause staining on the surfaces of your pool’s interior or exterior walls, as well as discoloration of its water.
  • Calcium Hardness is at the recommended level. Calcium hardness measures how much calcium is present in a given volume of water, the higher this number, the harder your pool water will be to maintain because calcium increases scale build-up on surfaces such as tile and grout lines within cement pools.
  • Make Sure Your Filter is Working

Sometimes, it’s possible that your pool filter isn’t working properly. In this case, you may want to “backwash” the filter by reversing the flow of water through it for a few seconds. This will help clear out any debris that has built up in the filter and restore its ability to clean your pool water.

It’s also important to make sure you have enough water flowing into your pool from above-ground sources; if there’s not enough volume going through your system, then dirt and other contaminants won’t be properly filtered out of them. You can check this by simply looking at where all of this excess flow is going (this might be hidden behind bushes or some other structure). You’ll need an appropriate amount as well; if there isn’t enough coming into contact with these surfaces then again.

  • Ensure the Pump Runs Daily

To ensure the pump runs daily, check that it is running. If you are unable to turn on your pool filter, check that the power switch is in the on position. If there is no power to your swimming pool, you will need to have an electrician come out and fix it before continuing these steps. Check that there are no broken parts or leaks in the pump itself, which can cause flooding and other issues with water quality. Make sure all hoses are connected properly as well as any other components of your setup (pipes/valves).

Conclusion

As you can see, there are many things that you can do to keep your pool clean and looking its best. By following these tips, you should be able to keep your pool clean and healthy for years to come.

CNC Wood Cutting in 2022: What is the Best Way to Do This?

As we move into the future, it's essential to stay ahead of the curve regarding technology. This is especially true in the world of...

How Much Can Storms Damage Your Property And How To Handle It

Storms can cause severe damage to your property and they also pose a great threat to you and your family. If your...

Moving to San Antonio

What You Need to Know Before Packing up and Heading to This Thriving Part of Texas San Antonio is one of those classic Texas towns...

6 Tips to Help You Find the Best Office Cleaning Service

Cleanliness and hygiene should be the priority of every office space as both factors can affect the productivity and health of those...

Pros and Cons of Laminate vs Vinyl Flooring

Laminate flooring is a man-made (synthetic) material and it consists of four layers. These are the wear, decorative, core, and backer layers. When these...

Are You New To Chainsaws and Need Some Tips on Using One?

Well, you’ve approached the authentic place because that’s exactly what I’ll be going over in this post. Don’t Sharpen...