How To Retile Your Bathroom In 8 Steps 

Are you tired of your bathroom’s dull and outdated design? Do you yearn for a change? Retiling might just be the transformative solution you’ve been seeking.

With a new set of tiles, you can instantly transform your bathroom space from mundane to mesmerizing. Following the straightforward steps in this guide can bring a fresh breath of air into your bathroom.

Retile Your Bathroom

So, roll up your sleeves and embark on this exciting bathroom renovation journey

Step 1: Plan And Prepare

The first step in retiling your bathroom is adequate preparation. Begin by measuring the area you plan to tile. This will help you determine the number of tiles and material quantity you’ll need.

Next, create a comprehensive list of the necessary tools and materials for the project. You’ll commonly need a tile cutter to adjust tile size, adhesive, trowel, chisels, sandpapers, fillers, etc.

Finally, settle on a style and color scheme that complements your bathroom’s aesthetics. For example, if you’re looking for brown tiles for bathroom floors, ensure the room retains neutral or warm tones like cream or burgundy.

Step 2: Remove Old Tiles 

Before starting the retiling process, remove the existing tiles from the bathroom walls or floors. Begin by gently prying off the edge using a chisel. 

Take extra care to avoid damaging the underlying surface, as it needs to remain smooth and clean for the new tiles to stick. After successfully removing the first tile, continue working systematically across the area to remove the remaining ones.   

Step 3: Prepare The Surface 

You need to thoroughly prepare the base before installing the new tiles. Start by inspecting the area for any cracks or holes. If found, patch them up using a suitable filler. This step will ensure the site remains smooth and even, providing a solid base for the new tiles. 

Also, clean the area to remove any dust or debris that may prevent tile adhesion.

If there are rough patches, smooth them using sandpaper to achieve a uniform finish. 

Step 4: Apply The Adhesive 

Once the base is ready, evenly apply the adhesive on a small section of the wall or floor using a notched trowel. Ideally, you should begin in one corner and gradually work your way out. 

Ensure that you leave sufficient space between the tiles for grout lines. This will help to accommodate minor size differences between tiles, thus ensuring a uniform appearance. 

Step 5: Install The Tiles 

After you’ve applied the bonding agent, start placing the tiles. 

Carefully press each tile into the adhesive and ensure it’s straight and properly aligned. A good practice is to use tile spacers to maintain consistent gaps. These gaps will come in handy during the grouting process. 

Continue working in small sections until all the tiles are in place. While at it, periodically check for levelness using a spirit level. 

Step 6: Apply Grout To The Gaps

After the adhesive has dried and firmly set the tiles in place, apply grout (also called tile filler) to fill the gaps. Spread the grout diagonally across the tiles using a float. Press it into the gaps and remove the excess with the float’s edge. Afterwards, clean the tiles with a damp cloth or sponge.

The grout application process is essential to fill the gaps between tiles for stability. Also, it prevents water and dirt infiltration and enhances the overall aesthetics of the tiled area. 

Ensure to follow the manufacturer’s instructions when mixing the grout to achieve a smooth and homogeneous consistency.

Step 7: Seal The Grout

Sealing the grout will protect your newly tiled bathroom and ensure its longevity. Let the tile filler cure for the recommended time, then apply a grout sealer. 

The sealer prevents stains, moisture, and mold from penetrating the grout, keeping it pristine. 

Step 8: Finishing Touches 

After successfully tiling and grouting your bathroom, it’s time for the final touches. Begin by reinstalling any fixtures or accessories, such as shelves or mirrors, temporarily removed during tiling.   

After you’ve put everything in place, feel free to step back and marvel at the stunning transformation. Now the focus shifts to proper cleaning to ensure the tiles remain in good shape for years and the bathroom remains clean and fresh.


Embarking on a bathroom retiling project is an exciting endeavor that can rejuvenate your space. By following the guidelines in this article, coupled with expert help, you may achieve a polished outcome you’ll be proud of. 

Don’t hesitate – start your retiling journey today and unlock your bathroom’s full potential.