A Handy Guide on Fixing Common Plumbing Problems

Dealing with plumbing issues can be quite a hassle, and they often seems like they occur at the most inconvenient times. From dripping faucets to clogged drains, these common plumbing problems can disrupt your daily routine and cause unnecessary stress without the help of a local plumbing company

However, with a little knowledge and some basic plumbing tools, you can tackle many of these issues yourself. In this guide, we shall discuss some simple steps to fix common plumbing problems, empowering you to save time and money on professional services.

  • Dripping Faucets

A dripping faucet is not only annoying but can also lead to water wastage and increased utility bills. The most likely cause of this problem is a worn-out washer or O-ring inside the faucet handle. To fix it, turn off the faucet’s water supply. Next, dismantle the faucet handle, replace the old washer or O-ring, and reassemble everything. Your dripping faucet should be a thing of the past.

  • Clogged Drains

Clogged drains are another prevalent plumbing issue that can disrupt your daily routine. The main culprits behind this problem are the accumulation of hair, soap scum, food particles, or other debris in the pipes. To tackle this, begin by using a plunger to create suction and dislodge the clog. 

If that doesn’t work, try a homemade drain cleaner made of baking soda and vinegar. Alternatively, you can use a drain snake or auger to remove the obstruction physically. Remember to avoid using chemical drain cleaners, as they can damage your pipes.

  • Running Toilets

A running toilet can waste a significant amount of water and inflate your water bill. The likely cause of such an issue is having a faulty flapper valve or a misadjusted float. Start by removing the toilet tank lid and inspecting the flapper valve. If it’s worn, replace it using a new one from the store. Additionally, check the float level and adjust it if necessary to ensure the water shuts off at the correct level. By fixing these components, you can resolve the running toilet problem.

  • Leaky Pipes

Leaky pipes can cause water damage to your home and lead to mold growth if not addressed promptly. To fix a leaking pipe, turn off the water supply and dry the affected area thoroughly. 

Depending on the size of the leak, you can use epoxy putty, pipe clamps, or plumber’s tape as temporary solutions. However, it’s essential to contact a professional plumber to permanently fix the leak and prevent further damage.

  • Low Water Pressure

If you’re experiencing weak water flow from your faucets or showerheads, low water pressure may be the culprit. This issue can be caused by mineral buildup in the aerators or showerheads. 

Remove the aerators and showerheads, soak them in vinegar overnight to dissolve the deposits, and rinse them thoroughly before reinstalling. If the problem persists, you may need to clean the pipes or consult a professional plumber to identify the underlying cause.

  • The Sump Pump

The sump pump plays a crucial role in preventing water damage to your basement. When it fails, it can lead to flooding and extensive water-related problems. Verify that the sump pump is plugged in and receiving power. If not, check the circuit breaker or replace any blown fuses.

Debris, dirt, and gravel can clog the pump or pit, hindering its performance. Regularly clean both the pump and the pit to ensure optimal functionality. The float switch turns the pump on or off. Gently lift the float to activate the pump manually. If it doesn’t turn on, it may need adjustment or replacement.

  • No Hot Water

A lack of hot water can disrupt daily routines and make you uncomfortable. To address this issue, consider the following:

Check the pilot light: For gas water heaters, ensure that the pilot light is lit. If not, you must relight it depending on the manufacturer’s instructions.

Inspect the circuit breaker: Electric water heaters may have a tripped circuit breaker. Check the breaker box and reset it if necessary.

Examine the thermostat: Adjust the thermostat settings to ensure they are at the desired temperature. Be cautious when making changes, and avoid setting it too high to prevent scalding.


Plumbing problems are a common occurrence in any household, but they don’t have to be a cause for panic. Armed with some basic knowledge and a few tools, you can tackle many plumbing issues yourself and save money on professional services. However, knowing your limitations and seeking professional help for complex problems is essential to avoid further damage. By following the steps outlined in this article, you’ll be well on your way to becoming a DIY plumbing expert and maintaining a smoothly functioning plumbing system in your home.